Beretta A400 Xplor Action Manual download pdf (Page 24)

TRIGGER PLATE

NOTICE: The trigger plate only needs to be disassembled in order to clean the

trigger mechanism.

• Engage the safety (the hammer is cocked) (Fig. 8).

• Press the carrier stop push button, if it has not already been pressed (Fig. 6).

• Remove the trigger guard retaining pin by pressing with a pin punch or an awl

(Fig. 36).

• Keeping the release button pushed all the way down, remove the trigger plate

from the receiver using the trigger guard as a lever, ﬁ rst in the direction of the

barrel and then outward (Fig. 37).

BERETTA OPTIMACHOKE

HP TUBES

Beretta Optimachoke

HP (High Performance) tubes are built in high resistance

steel to ensure a long life and rust protection and are designed to withstand the

use of steel shot. They can also shoot High Performance steel ammunitions.

NOTICE: The Optima-Bore

HP barrel of the A400 Xplor can only mount

Optimachoke

HP tubes. Other types of interchangeable Beretta choke tubes

are not appropriate for use with Optima-Bore

HP barrels and these will alter the

shot pattern distribution.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 34 35

No comments

Beretta A400 Xplor Action Manual Page 24